Booth for a dog with their own hands: drawings, projects and their implementation from A to Z

If you want to keep your dog outside, you must take care of building a kennel. On how comfortable and warm it will turn out, it will depend on the well-being of the animal.

Types of designs

Before starting to read the master classes on "how to make a kennel for a dog with their own hands", you need to study what structural solutions in general can be at the dwelling of a four-legged guard.

The simplest option is a box made of boards and covered with a single sloping roof. Such construction is usually equipped with a not wide canopy - it allows to protect the animal from the heat and rain.

Economy class dog shelter consists of the kennel and built in it an open shelter like a canopy.

The advanced modification is a house with a vestibule, which provides a place for feeding and a compartment for keeping food supplies.

If you are the owner of more than one dog, it is rational to choose the construction, which provides for simultaneous presence of all pets in it. Another solution could be a structure divided by partitions and equipped with separate climbing holes.

Choosing dimensions and making drawings

Most often the kennel is built "by eye", taking as a guide its comfort for the pet. However, experts advise to choose the drawings and dimensions of the dog kennel with their own hands, guided by certain rules.

All geometric parameters of the house depend on the size of the animal that will live there. Therefore, before starting construction work, it is important to take measurements of the pet.

When making a drawing, the following must be taken into account:

The depth of the kennel should not be less than the distance from the head to the base of the tail.
The width is determined by the height of the dog at the withers.
The highest point of the kennel must be located above the level of the head.
For a puppy, it is recommended to make some allowance for growth.

As for the kennel, its width should be a few centimeters more than the width of the pet's chest, and in height it can be slightly lower than the size of the animal at the withers.

These days, special tables have been developed where approximate dimensions of dog kennels are given based on the varieties of four-legged animals.

Erection of a simple kennel

The erection of a kennel, even the simplest construction solution requires drawings. If this is difficult for you, you can use any ready-made scheme. In addition, you need to pay attention to the following points:

It is not recommended to get carried away with thermal insulation. Almost all varieties do not tolerate high temperatures, but the cold is not terrible to them.
If the dog with puppies, it is necessary to provide for the device of special rails, so that she did not crush her weight of the offspring. And the dimensions of the kennel in this case should be maximum for this breed.
A mandatory attribute should be a bedding of sawdust, straw or barley hay. The latter option is preferable.
It is necessary to refrain from strapping the pet to a chain.

Materials and equipment required

The ideal wood for a kennel is considered larch, but pine can also be used. The advantages of these varieties include strength and durability.

Having decided to build a dwelling for a four-legged guard with your own hands, it is worth preparing:

hammer;
screwdriver;
a saw and metal scissors;
planer.

You will also need nails, battens, mineral wool, plywood sheet and edged boards. The lumber must be sanded and impregnated with antiseptics.

Master class

The general scheme of how to make a dog house with your own hands includes the following points:

Creation of a bar base for the house. Optimal parameters - 90*70 cm.
Arrangement of an alcove under the mineral wool.
Preparation and laying of insulation of the required size.
Making the floor from the planks.
Erection of the sides.
Construction and installation of the front and back wall of the doghouse.
Installation of the manhole.
Strengthening and insulation of the walls of the structure. Covering them with boards.
Erection of the roof.
Installation of the niche for insulation and its laying.
Covering the roof with boards, organization of the slope.
Installation of roofing.

Other ideas for a dog kennel

Ideas for the kennel these days come up with a lot. The most original ones are presented below.

Dog kennel from pallets

Strength and reliability - these qualities are inherent in the booth, built from improvised means, for example, from pallets. To make it is quite simple. First it is necessary to disassemble several boards and sort out the obtained materials. One pallet should be left - it will serve as the base of the kennel.

The next step is to make a frame out of planks. The third step should be the sheathing of the frame with slats on the inside and outside and the laying of insulation.

The roof of such a structure may be a single slope or gable. The main thing that it was insulated.

A small house made of barrels

Such a hut has many advantages, among which it is worth noting the simplicity and speed of construction. The barrel should be put on its side, installing on the sides of reliable stops. It is necessary to cut a manhole in the lid, and the inner space should be insulated.

In order to make a cabin for your four-legged friend, you do not need to have carpentry skills. It can be built from any means at hand - leftover boards, pallets, an old barrel. The main thing is that the house fits the pet in size and is well insulated.