How to make barrettes with your own hands: making designer barrettes from improvised materials

Despite the fact that in stores a sufficient assortment of different hairpins and hairpins, handmade is much more expensive. Even to receive such as a gift is much more pleasant, especially if it is made by the hands of a close person. It is not difficult to learn how to make hairpins yourself. A little theory, practice and you will have the opportunity to give your friends and relatives original hair ornaments.

Necessary tools to make home hairpins with their own hands

All the necessary materials and components for the work are sold in any store with handmade goods. If you want to learn how to make hairclips for hair with their own hands, you will need them for training. You need to start your purchases with the basis. It comes in different kinds:

nevidimka;
banana;
crocodile clip;
snap;
rubber band;
spring;
automatic clamp;
tick-tock.

Almost any material can be used to make hairpins. Half of what will be needed for the work can be found at home. This can be, for example, any fabric, finishing ribbons, fur, leather, buttons, zippers, as well as rhinestones, beads of various materials, beads, polymer clay.

In addition to this work will need a variety of tools. First of all you need tailor's scissors, needles, hook, awl, sharp cutter, tweezers and clamps. You will also need pliers, wire cutters and a glue gun. In the process of work will be useful and other tools that are not so difficult to get.

How to make a barrette from ribbons in the technique of kanzashi

Everyone has heard about the technique of kanzashi, but for some reason it is considered too difficult for beginners. For a start, you can try to make a barrette from satin ribbons, made in this style. Following the detailed instructions, it is not difficult to make it at all. To make a hairpin you need: 35 cm of satin or rep ribbon (width 5 cm), an elastic band or a latch for the base, a small piece of felt of the same color as the ribbon, a half bead and other tools for work.

Ribbon is cut into pieces of 5 cm each. There should be 7 identical square pieces. Their edges should be treated with a lighter, so that the fabric does not unravel. Each square is folded diagonally, the ends are cut and soldered together with a lighter. You should get a convex petal. Do the same with the remaining pieces.

The bottom part of the petal is strung on a thread, well pulled together and fastened. Petals straighten. It remains only to cut a circle of felt, it should be about 2 cm in diameter. On it should glue a flower from the ribbons. In the center of the flower glue a half bead.

Make sure that there is no glue residue visible. The last step - the flower is attached to the base itself. Make several of these and present hairpins from satin ribbons with their own hands, such an original set is sure to please.

Instructions for making a butterfly hairpin out of felt

To make a beautiful butterfly-shaped hairpin, you need pieces of felt of different colors, chenille wire, as well as a base for the hairpin. Choose the color of the felt as you wish. To begin, two circles with a diameter of 7 cm are cut out, these will be the upper wings.

Change the color of the fabric and cut two circles with a diameter of 4.5 cm for the lower wings. For the body of the butterfly choose another fabric, for example, yellow. Next, the hairpin is assembled:

On the wings make a small assembly with a thread and needle - first on the lower, then on the upper.
Wings are glued or sewn to the body of the butterfly, and then some tendrils.
The butterfly is glued to the base.
Wings spread, the butterfly is ready.

Pin bobby pin in the form of a rose of foamiramine

Foamiran or foam rubber is a handy material to work with. It can be given any shape and make beautiful flowers from it. A flower made of foamiran is a wonderful decoration for any hairpin. Try making a hair ornament in the form of a hairpin decorated with a beautiful rose. You will need two pieces of green and peach colored foaming paper, pink pastel, beads and a hairpin.

Use cardboard to make a template for the petals and leaves, and then cut out the petals and leaves from the fom paper template. Paint the tips of the petals with pastel to make them look more natural. Set three petals aside to be the rosebud. Use an iron to heat them up, fold them, and gather them in folds. Tie them up by twisting them together and pull out the middle a little.

Cut 15 cm length of wire, thread beads of proper size on it. Leave a drop of glue on the wire so that the beads don't get lost. Insert the wire in the center of the bud and start to assemble the flower. Glue one petal at a time to the bud, applying a little glue to the very edge. Iron the leaves onto it. Wire the flower to the bobby pin itself and glue the leaves to the bobby pin to hide the wire.

If you liked the first experiment, look for other hairpins from foamiran with their own hands, which can also be easily made at home.

Leather barrette in the form of a rose flower with your own hands

If you have at home an old leather bag or jacket that has not been used for a long time, do not rush to throw it away. From this leather you can make beautiful hairpins or hair bands. Leather can be replaced by denim.

For work take a piece of denim or leather, beads and a hairpin, and for tools prepare a glue gun or scissors. Make a hairpin is very simple:

Cut a flat strip, from which later you will make a flower. The narrower the strip, the smaller the rose will be.
Cut a circle out of the material.
Twisted band is glued to the cut circle. Beginning from the center and then in a circle. The end of the rose is hidden under the bottom and glued.
Flower given a neat appearance, cut bumps, loose threads.
In the very center of the bud glue a bead.
The basis can be different, depending on your wishes.

Flat barrette decorated with beads: how quickly to make

If you want to know the fastest way to make a hairpin with your own hands, then these instructions are for you. To make it, you need a clean base for the hairpin, beads, artificial stones, shells, rhinestones for decoration. In addition, be sure to need a glue gun and tweezers, so it was convenient to work.

A piece of leather or suede is glued to the base, be sure to twist the edges inside and glue. Next, glue the decor to the hairpin in random order. If the beads are very small, it is more convenient to help with tweezers. Once the glue dries, everything is ready.

Making hairpins with their own hands is a fascinating hobby that brings pleasure, and sometimes additional income from the sale of products made with their own hands. Try making at least one yourself to see for yourself.